The solids CONTACT CLARIFIER™ has the ability to act as both an enhanced flocculation device as well as a high rate chemical precipitator. Mixing, internal solids recirculation, gentle flocculation and gravity sedimentation are all combined into a single unit.
How it Works: Influent flow is mixed with previously settled solids within the draft tube. Gentle mixing within the reaction well promotes agglomeration of floc particles and/or chemical precipitates. The aggregated solids settle out more rapidly in the clarification area. Even better clarity is achieved when particles become enmeshed in a sludge blanket layer. Rotating sludge scrapers transport settled solids to the center of the basin for removal. Clarified overflow is removed through a radial launder system that draws water from the entire surface area to prevent solids carryover caused by uneven velocity currents. For high upflow rates, tube settlers can be added to increase the effectiveness of gravity sedimentation. Because the Solids CONTACT CLARIFIER™ re-circulates previously settled solids many times over, less chemical input is needed and results are superior to conventional treatment methods. Efficient recirculation is provided by a low shear, high volume pumping impeller. This impeller is unique to WesTech and improves on traditional radial impeller designs. The sweptback curved blades of the impeller minimize horsepower required and the shearing of floc particles.