Flex- Wall, 2510, Side Deploy

The side deployed Flex-Wall® 2510 has been tested and approved to the ANSI/FM 2510 American National Standard for Flood Abatement Equipment for Openings.  The Flex-Wall 2510 is qualified for a range of Design Flood Elevations and across varying width openings, all without posts across the span.

The system includes a high-strength fabric wall that can be deployed rapidly for flood protection.  The patented system is stored in a container at the point of use so that all materials and components are available when needed.  Sealing is achieved via clamping to the opening walls and the ground.  Connection at the opposite end of the opening is accomplished by bolting an integral Structural End Bar and a Vertical Clamp Bar to a pre-installed Receiver.  All operations are manual in case of power outage using standard hand tools.  The Flex-Wall 2510 is simple to operate and can be easily deployed or stowed by two people within 30 minutes.

Product Attributes

  • Point-of-use storage allows deployment at last moment for minimal operational disruption, resumes operations faster
  • <0.08 gal/hour/linear foot of barrier perimeter seepage equate to extremely low levels over the flood duration
  • Highest FM Approved Flood Barrier 6′ DFE
  • Scalable Opening Protection at ranges to 21′ wide
  • No center posts required across the openings which helps minimize storage container size and deployment/retraction
  • Rapid deployment allows opening to be secured in only 30 minutes by two people so manpower needs significantly less
  • Compact stowage of flexible barrier results in small storage spaces at the opening
  • Clamp Bars stored in the Receiver Container assures all parts are there when needed
  • No added operational costs for storage
  • Robust materials and construction withstands debris impacts


  • Open the tamper proof Flexible Barrier and Receiver Storage Containers
  • Attach the Guide Cable to a winch in the Receiver Container at the opposite side of the opening
  • Pull the flexible barrier across the opening
  • Bolt the barrier to a receiver using the integral Structural End Bar
  • Bolt the Vertical Sealing Clamp Bar to the Receiver
  • Secure the Clamp Bars at the ground/integral sealing skirt



There are no reviews yet.

Be the first to review “Flex- Wall, 2510, Side Deploy”

Your email address will not be published. Required fields are marked *